Mold remover Product List and Ranking from 8 Manufacturers, Suppliers and Companies

[Introduction of Mold Removal Work Achievements] Certain Office, Ceiling Board Around Air Conditioner

Mold sterilization and cleaning with minimal odor, breaking down and eliminating mold! It is possible to extremely delay the appearance of mold on surfaces.

Our system sterilizes even the mold spores inside the board, significantly delaying the onset of visible mold. Additionally, if painting is done in a situation where the root causes of mold growth cannot be resolved, it will effectively seal the mold. The sealed mold will quickly resurface, causing visible mold to appear again sooner. We recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Store Ceiling Board

Since sodium hypochlorite is a very safe chemical compared to paint and others, it has a low odor and will not affect the opening of the store!

Our system impregnates the ceiling boards with a chemical solution that disinfects and cleans even the mold inside the boards. It has minimal odor and provides excellent results, and compared to painting and cleaning, it can significantly delay the reappearance of mold on the surface. We recommend taking prompt action as soon as mold becomes noticeable. 【Main components of the mold removal agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Supermarket Ceiling Board

It not only has a low odor and a good finish, but it can also significantly delay the appearance of mold on the surface compared to paint and cleaning!

Our system impregnates the ceiling boards with chemicals to disinfect and clean the mold inside the boards. In this construction, we will fully protect the product. Depending on the progress of the mold and the number of years, we will determine the dilution ratio of the chemicals and apply them using a special mop, brush, or dedicated sprayer. Since the chemicals only react to mold, there is a high possibility that dirt that is not mold, such as dust or burns, will not be cleaned. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Introduction of Mold Removal Work Achievements] Certain Commercial Facility - Ceiling Board Around Air Conditioning Unit

We recommend our system before it becomes a situation where mold is sealed off!

Our system sterilizes even the mold spores within the board, significantly delaying the noticeable appearance of mold. It is said that the mold barrier is made of protein and is difficult to completely decompose. ARA has sterilizing effects as well as oil and protein decomposition effects. By applying ARA to the mold, the protein-decomposing components dissolve the barrier, and the sterilizing components break down the fungal nuclei, allowing for complete sterilization. [Main components of the mold remover] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Hotel Bathroom

It is possible to significantly delay the noticeable appearance of mold! We recommend our system before painting.

In this construction, we will provide full surface protection for the product. We will impregnate the ceiling boards with a chemical to disinfect and clean the mold inside the boards. Not only does it have a low odor and a good finish, but it can also significantly delay the appearance of mold on the surface compared to paint and cleaning. Please feel free to contact us when you need our services. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Supermarket Ceiling

The chemical penetrates the ceiling board, killing mold even inside the board! Complete sterilization is carried out.

Our system impregnates the ceiling boards with chemicals and performs sterilization and cleaning of the mold inside the boards. If painting is done in a situation where the root causes of mold growth cannot be resolved, it will effectively seal the mold. The sealed mold will soon reappear on the surface, and the mold will become noticeable again quickly. Therefore, we recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold Removal Work Achievements: Certain Hotel Ceiling

It kills mold spores inside the board! It can significantly delay the appearance of mold.

In this construction, we will cover the products with full protection. Depending on the progress and the number of years, a chemical will be applied. After 20 to 30 minutes, the black mold will turn brown. Once it turns brown, the mold spores are almost completely sterilized. Once sterilization is complete, we will wipe away the brown areas. At that time, old mold that has been present for many years may have stained the board, and some brown discoloration may remain. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold Removal Work Achievements: Block Wall

Mold removal from block walls in Nara Prefecture! After applying the original mold removal agent, low-pressure water flushing cleaning.

At Apia Co., Ltd., we conduct low-odor mold disinfection cleaning. After applying our original mold remover, we perform a low-pressure water flushing cleaning operation. By applying ARA to the mold, the protein-decomposing components dissolve the partitions, and the disinfecting components completely sterilize by breaking down the fungal nuclei. Not only is it low-odor and provides a good finish, but it can also significantly delay the reappearance of mold on the surface compared to painting and cleaning. [Main Components of Mold Remover] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactants (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements Introduction] Certain Elderly Care Facility, Hinoki

Introducing a case of mold removal work on a cypress barrel at a certain elderly care facility in Osaka Prefecture!

We would like to introduce the mold removal service offered by Apia Co., Ltd. By applying ARA to the mold, the protein-decomposing components dissolve the partitions, and the antibacterial components completely eliminate the bacteria by breaking down the fungal spores. It has a low odor and provides a good finish, and compared to paint and cleaning, it can significantly delay the reappearance of mold on the surface. 【Main Components of the Mold Removal Agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold Treatment Revolution

Remove mold from deep within walls with our patented "penetrating agent & decomposing agent." Half-day installation without scaffolding.

The "Mold Treatment Revolution" is a groundbreaking mold treatment technology that completely removes mold that has developed on walls and ceilings simply by applying a safe and powerful penetrating agent and decomposer. No scaffolding is required, and the installation is completed in just half a day. There are numerous implementation results in food factories, supermarkets, hotels, and more. There is no need to replace boards, and it is possible to maintain a beautiful condition with low-cost regular maintenance. 【Features】 ■ Uses a patented agent that is safe for the human body ■ Easy installation by simply applying with a roller, etc. ■ No need for anti-mold painting ■ Eliminates odor issues such as chlorine smell *For more details, please refer to the materials. Feel free to contact us as well.

Company：ピュアソン環境衛生化学事業部
Price：Other

Chemicals
Other safety and hygiene products
Food Conveyor Equipment
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Penetrates the substrate to eliminate and suppress mold mycelium! 'Espo NV-102'

Penetrates deep into the substrate! It kills mold mycelium.

Espo Chemical Co., Ltd. manufactures and sells chemicals related to environmental conservation and safety maintenance, as well as system design that includes equipment and the provision of related technologies. "Espo NV-102" is a disinfectant primer that can be used on air conditioners and wallpaper. It kills mold hyphae and suppresses the germination of mold spores. It has excellent permeability to the substrate, effectively killing hyphae that have penetrated deep inside. 【Features】 ■ Usable on air conditioners and wallpaper ■ Kills mold hyphae ■ Suppresses the germination of mold spores ■ Excellent permeability to the substrate, effectively killing hyphae that have penetrated deep inside *For more details, please refer to the PDF document or feel free to contact us.

Company：エスポ化学
Price：Other

Other consumables
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Defeat mold from the roots! "Mold Treatment Revolution" *Patent obtained

The savior against mold: With triple power of quick removal, deep penetration disinfection, and mold and antibacterial prevention, it eradicates mold and prevents its recurrence.

The "Mold Treatment Revolution" is a mold treatment technology that enables a dual approach of "rapid action" to remove surface mold and "penetration" to eliminate mycelium from the roots. With a patented combined treatment of combined chlorine and free chlorine, along with the groundbreaking patented anti-mold component "MIS" that does not use pesticides, it addresses the issues of traditional mold treatment. Additionally, the work can be completed on the same day without the need for scaffolding, achieving significant cost reductions compared to painting or replacement. [Reasons to Choose Us] ■ Patented treatment technology ■ Safe ingredients ■ Penetration treatment to the depths of the roots ■ Low cost in a short period *For more details, please refer to the PDF materials or feel free to contact us.

Company：アーバス
Price：Other

Other contract services
others
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tomei Co., Ltd.

Providing a hygienic space through mold removal.

Are you struggling with mold? Has mold reappeared within a month after removal? Our service suppresses mold growth (germination) for six months after removal. It only requires three steps. Step 1: We inactivate mold spores with a weak acid. Step 2: We bleach with a strong alkali. The mold disappears without a trace. Step 3: We apply a weak alkaline antibacterial coat. Please visit our booth for more details. We will show you examples of our work.

Company：公益財団法人尼崎地域産業活性化機構
Price：Other

others
Mold remover

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【システム非公開】レザーキュアカビ用ミストプラチナ 100ml

カビを除去

当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、「レザーキュアカビ用ミストプラチナ 100ml」を取り扱っております。本製品に含まれる成分が菌の表面に付着し、皮革製品に生えたカビを除去します。・カビを抑制抗菌剤が皮革に浸透し、カビの生育を抑制します。・高い安全性抗菌剤とプラチナを配合しています。

Company：新日本機能食品
Price：Other

others
Mold remover

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【システム非公開】業務用コケカビ取り 18L

屋外用

当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、「業務用コケカビ取り 18L」を取り扱っております。外壁、ベランダ、門柱、玄関、タイル、レンガ、踏み石、墓石等、建造物に付いた美観を損なうコケやカビ、地衣植物を除去します。薬剤をスプレーするだけ、水洗い不要。軽いコケやカビは噴霧後一日で除去されます。

Company：新日本機能食品
Price：Other

others
Mold remover

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Information on ceiling mold removal and anti-mold coating.

Mold removal and anti-mold treatment after closing, without affecting store operations! A clean condition lasts for a long time.

We would like to introduce our photocatalytic coating services that we offer. We perform mold removal and anti-mold treatment after store closing hours, ensuring that there is no disruption to business operations. The estimated area we can cover in a day is 150 to 200 m². We apply a specialized mold removal agent to eliminate mold. The anti-mold agent is then applied using specialized painting machines, rollers, and brushes. After the treatment, the clean condition lasts for a long time. 【Features】 ■ Mold is removed by applying a specialized mold removal agent. ■ The anti-mold agent is applied using specialized painting machines, rollers, and brushes. ■ The clean condition lasts for a long time after treatment. ■ Work is carried out after closing and before opening. ■ The estimated area we can cover in a day is 150 to 200 m². *For more details, please refer to the PDF document or feel free to contact us.

Company：チタンネクストジャパン
Price：Other

Coating Agent
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Building - Inside Air Conditioning Unit

We will impregnate the ceiling board with chemicals and carry out sterilization and cleaning to eliminate mold inside the board!

In this construction, we will provide full protective measures for the products. The dilution ratio of the chemicals will be determined based on the progress of mold and the number of years, and the chemicals will be applied using a dedicated mop, brush, or spray device. Since the chemicals are much safer compared to sodium hypochlorite and paint, they have little odor and will not affect the opening. After 20 to 30 minutes, the black mold will change to brown. When it turns brown, the mold spores are almost completely sterilized. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Hospital - Ceiling Boards Around Air Conditioning

The black mold turns brown after 20 to 30 minutes! When it turns brown, the mold spores are almost completely sterilized.

Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. The dilution ratio of the chemicals is determined based on the progress of the mold and the number of years, and the chemicals are applied using a dedicated mop, brush, or spray device. We will cover the entire area for protection. Since we use very safe chemicals compared to sodium hypochlorite and paint, there is minimal odor, and it will not affect the opening of the business. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Performance Introduction] Certain Facility Garbage Storage Room

Decompose and eliminate mold! You can significantly delay the onset of noticeable mold.

In this construction, we will cover the products with full protection. Since the chemicals used are much safer compared to sodium hypochlorite and paint, there is little odor, and it will not affect the opening. Once the disinfection is complete, we will wipe off the brown areas. At that time, old mold that has been present for many years may have stained the board, and some brown color may remain. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievement Introduction] Certain Factory Ceiling Board

The product is fully protected! Chemicals will be applied depending on the progress of mold and the number of years.

Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. Typically, even if you clean the surface through wiping or scrubbing, you cannot sterilize the mold spores inside the board, so mold becomes noticeable again quickly. Additionally, if you paint over a situation where the root cause of mold growth cannot be resolved, it will seal in the mold, so we recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Building Ceiling <Kanagawa Prefecture>

Low-odor, mold-killing cleaning! It is possible to significantly delay the noticeable appearance of mold.

In this construction work, we will provide full protection for the products. The dilution ratio of the chemicals will be determined based on the progress of mold and the number of years, and the chemicals will be applied using a dedicated mop, brush, or spray device. Since the chemicals only react to mold, there is a high possibility that they will not clean dirt that is not mold, such as dust or burns. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Office Ceiling

Disinfect and clean the mold inside the board by soaking the ceiling board with chemicals!

Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. The dilution ratio of the chemicals is determined based on the progress of the mold and the number of years, and the chemicals are applied using a dedicated mop, brush, or spray. Since the chemicals are much safer compared to sodium hypochlorite and paint, they have a low odor and will not affect the opening of the business. [Main components of the mold removal agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Hotel, Ceiling around the Air Outlet

It is possible to delay the occurrence of mold! We recommend considering our system before painting.

Our system impregnates the ceiling boards with a chemical solution that disinfects and cleans even the mold inside the boards. By applying ARA, which has disinfecting effects and the ability to break down oils and proteins, to the mold, the protein-decomposing components dissolve the partition, and the disinfecting components break down the fungal nuclei, achieving complete sterilization. Please feel free to contact us when you need our services. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Results Introduction] Certain Building Ceiling <Gifu Prefecture>

Completely sterilized by melting the neighboring area and breaking down the bacterial nuclei with sterilizing components!

Typically, even if you clean thoroughly, you cannot eliminate the mold spores inside the board, so mold will soon become noticeable. However, our system sterilizes even the mold spores within the board, significantly delaying the onset of visible mold. Additionally, if you paint over the situation where the root causes of mold growth cannot be resolved, it will effectively seal in the mold. We recommend using our system before painting. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Introduction of Mold Removal Work Achievements] Certain Elderly Care Facility

Decomposing and eliminating mold! It is possible to extremely delay the appearance of mold on the surface next time.

We would like to introduce our "Mold Sterilization Cleaning" service. Since we sterilize the mold spores inside the board, it is possible to significantly delay the onset of visible mold. If painting is done without addressing the root causes of mold growth, it can end up sealing in the mold. Therefore, we recommend using our system before painting. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold Removal Work Achievements Introduction: Certain Hospital, Indoor

The product is fully protected! Chemicals will be applied depending on the progress of mold and the number of years.

We would like to introduce our "Mold Disinfection and Cleaning" service. We use chemicals that are much safer compared to sodium hypochlorite and paints, resulting in minimal odor and no impact on your business operations. After 20 to 30 minutes, black mold will begin to turn brown. Once it turns brown, the mold spores are almost completely disinfected. We recommend taking prompt action as soon as mold becomes noticeable. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactants (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Commercial Building Water Storage Tank

The black mold turns brown after 20 to 30 minutes! When it turns brown, the mold spores are almost completely sterilized.

We would like to introduce our "Mold Disinfection and Cleaning" service. In this process, we will cover the entire area with protective measures. Depending on the extent of mold growth and the number of years, we will determine the dilution ratio of the chemicals and apply them using a specialized mop, brush, or spray device. The chemicals used are very safe compared to sodium hypochlorite and paint, resulting in minimal odor and no impact on the opening of the business. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactants (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Factory Bathroom

Introducing a case of mold removal work in a certain factory bathroom in Osaka Prefecture!

At Apia Co., Ltd., we conduct low-odor, mold sterilization cleaning. We impregnate the ceiling boards with chemicals to sterilize and clean the mold inside the boards. Not only is there minimal odor and a good finish, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. Since we use very safe chemicals compared to sodium hypochlorite and paint, there is little odor, and it does not affect the opening of the business. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Hotel Hinoki Bathtub

Introducing a case of mold removal work in a hinoki bathtub at a certain hotel in Aichi Prefecture!

We would like to introduce the mold removal service offered by Apia Co., Ltd. The main reason why commercial mold removers cannot kill mold is that they cannot break down the septum, preventing the detergent (disinfectant component) from reaching the fungal spores. ARA has disinfecting properties as well as the ability to break down oils and proteins. By applying ARA to the mold, the protein-decomposing components dissolve the septum, allowing the disinfectant components to break down the fungal spores, achieving complete sterilization. [Main Components of Mold Removal Agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactants (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Performance Introduction] Certain Food Factory Coated Wall Surface

Introducing a case of mold removal work on painted walls at a certain food factory in Hiroshima Prefecture!

We would like to introduce the mold removal service offered by Apia Co., Ltd. The main reason why commercial mold removers cannot kill mold is that they cannot break down the septum, preventing the detergent (disinfectant component) from reaching the fungal spores. ARA has both disinfecting effects and the ability to break down oils and proteins. By applying ARA to the mold, the protein-decomposing components dissolve the septum, allowing the disinfecting components to break down the fungal spores, achieving complete sterilization. [Main Ingredients of Mold Removal Agent] ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools
Mold remover

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold remover Product List and Ranking from 8 Manufacturers, Suppliers and Companies | IPROS GMS

Mold remover Manufacturer, Suppliers and Company Rankings

Mold remover Product ranking